HiFIT Premium Device

HFM 21R1-S

HFM 21R1-S is the consistent further development of the type HFM 12P1, which has been used successfully internationally for over 14 years.

The impact of the new HFM 21R1-S HiFIT device was structurally decoupled once more. This leads to even fewer vibrations in the handle and a very pleasant behavior when guiding along the weld seam. The handle has been designed to be even more ergonomic and an additional handle is available across the hammering axis. The acceleration value on the handle is an excellent 3.9 m/s^2!

The pin can still be changed without tools. However, to prevent unintentional loosening detents has been included which makes the process even easier and safer.

We know from many applications that the size often plays a decisive role. This is why the overall length has been shortened from 288 to 225 mm. The angle head can of course not only be used with the standard HFM12P1, but also on the HFM21R1-S. This means that even the most difficult areas of your welded construction can be reached.

The adjustment unit at the end of the hammering mechanism is also used to set the intensity. The preset intensity can now be easily read off using a 10-part scale.

Technical Data

Compressed air supply: 6 to 8 bar

Power requirement (rechargeable battery): 3.7 V, 950 mAh

Dimensions (L x W x H): 225x60x205 mm

Weight: 2,3 kg

Storage temperature: 0 to +60°C

Air demand: approx. 250 l/min

Vibration on the handle: 3,9 m/s²

The right to technical changes is reserved.

Features

- Robust and compact design for difficult-to-reach details

- Lightweight